How-To Guide: 3 Ways To Boot Ubuntu Linux From a USB Flash Drive

Possibility 1: Boot Ubuntu as a Stay CD from a USB Flash Drive

Use this selection to put in Ubuntu as a Stay Set up, which lets you boot from the USB flash drive in Ubuntu, expertise the Linux atmosphere however is not going to retain any modifications or settings after you shut down. This can be a nice approach to get a really feel for the OS, check a few of its capabilities in addition to typical hardware compatibility. install node ubuntu

Applications you could have to obtain:

Ubuntu 10.04 Stay CD ISO out there at ubuntu.com

Common USB Installer out there at pendrivelinux.com

What you will have:

Working Home windows XP/Vista/7

Fats32 Formatted USB 2.zero Flash Drive, not less than 1GB

PC with a Bios that may boot from USB

Now with the entire crucial elements in place, we are able to start to setup our Ubuntu Stay USB Drive.

1. Run the Common USB Installer by Pendrivelinux.com that you just downloaded earlier.

2. Select Ubuntu 9.10/10.04.1 Desktop i386

3. Choose the Ubuntu Stay CD that you just downloaded earlier

4. Select your Flash Drive

5. On this occasion, we’re going go away the persistence choice unchecked.

This will take anyplace from 15 minutes to 30 minutes relying on the velocity of your system. At one level the progress bar will freeze till it’s achieved, and that is the lengthiest wait of the method.

As soon as full, you possibly can reboot your pc with the USB flash drive within the USB port, press F12 for the Boot Menu and select the detachable media as well from and you might be in.

As it is a Stay USB, any modifications you make to the Ubuntu atmosphere is not going to persist by means of a reboot. It is because operating on this mode, Ubuntu makes use of out there RAM rather than Swap and Laborious Disk house. This selection additionally incorporates the set up recordsdata wanted to put in Ubuntu on to your desktop if you happen to ought to so need.

Possibility 2: Boot Ubuntu as a Stay CD with Persistence from a USB Flash Drive

This selection will set up Ubuntu Linux onto your flash drive with an space for persistent storage. It is possible for you to to restart the pc, boot again into the Linux atmosphere and all settings or modifications made beforehand will persist.

NOTE: This selection is especially onerous on Flash Reminiscence, as there could be fairly a little bit of studying and writing to the Flash Reminiscence.

What you will have:

Working Home windows XP/Vista/7

Fats32 Formatted USB 2.zero Flash Drive, not less than 2GB

PC with a Bios that may boot from USB

Now with the entire crucial elements in place, we are able to start to setup our Ubuntu Stay USB Drive.

1. Run the Common USB Installer by Pendrivelinux.com that you just downloaded earlier.

2. Select Ubuntu 9.10/10.04.1 Desktop i386

3. Choose the Ubuntu Stay CD that you just downloaded earlier

4. Select your Flash Drive

5. Choose the Persistence Possibility of 1GB Casper-RW

This will take anyplace from 15 minutes to 30 minutes relying on the velocity of your system. At one level the progress bar will freeze till it’s achieved, and that is the lengthiest wait of the method.

As soon as full, you possibly can reboot your pc with the USB flash drive within the USB port, press F12 for the Boot Menu and select the detachable media as well from and you might be in.

As it is a Stay USB with Persistence, any modifications you make to the Ubuntu atmosphere will maintain by means of a reboot. This selection additionally incorporates the set up recordsdata wanted to put in Ubuntu on to your desktop if you happen to ought to so need.

Possibility 3: Set up Ubuntu on to a USB flash Drive

This selection works by means of putting in Ubuntu to the flash drive as a whole set up. It doesn’t retain the set up recordsdata to put in on one other system. This can assist you to use Ubuntu precisely as if it have been put in alone on the onerous disk. You possibly can boot from it with any pc that may boot from a USB flash drive.

Be aware: This methodology requires that you just disable your onerous drive in BIOS to stop overwriting your present working system and pressure the set up onto the USB drive.

What you will have:

USB 2.zero Flash Drive, not less than 4GB

PC with a BIOS that may boot from USB

Clean CD

A Laptop with the power to Burn CD/DVD

Now with the entire crucial elements in place, we are able to start the method.

1. First, you will have to burn your Ubuntu ISO to CD utilizing a program like ImgBurn out there at ImgBurn.com

Boot your pc and press F2 to enter the system BIOS. Inside right here it would be best to disable your Laborious Drive. If this isn’t an choice in your BIOS, I might recommend shutting down your pc and unplugging the ability and information cables out of your onerous drive earlier than continuing. NOTE: In the event you select to not disable your onerous drive, you run the chance of putting in Ubuntu on high of your present OS and might lose beneficial info.

3. After you could have disabled your onerous drive, place the Ubuntu Stay CD into your pc and boot from this.

4. On the preliminary boot display, select to attempt Ubuntu, not set up.

5. As soon as Ubuntu masses, plug within the desired flash drive into the pc.

6. Now, double click on on the Set up Ubuntu icon that seems on the desktop.

7. The primary Three screens are language, time zone, and keyboard format.

8. Now Ubuntu will notify you that there’s a disk mounted, and asks to unmount it. That is your flash drive. Give it permission to unmount.

9. That is the put together disk house display. I selected to depart mine at default and let the installer deal with the partitions wanted by Linux.

10. Now you will note the login and consumer info display.

11. Now you might be prepared to put in, click on set up.

12. At one level through the set up, you could discover a skip button seem on the underside left. That is to skip the auto replace, and eventually the language packs. I selected to skip language packs replace.

13. This will likely take some time, mine took about 35 minutes to finish. When it’s achieved, eject the disk and shut down the pc. Plug your onerous drive again in if crucial, or boot your pc into bios and re-enable it. Reboot your pc and press F12 to enter the boot menu, select the flash drive and boot into Ubuntu.